OPTICAL BONDING – MAKE MORE OUT OF YOUR OPTICAL COMPONENTS
Optical bonding is an optical bonding and joining technique for design glass / PMMA with touch and display. Highly transparent media also have a stress-equalizing effect and therefore do not affect the thermal expansion of the individual components.
Many people only associate optical bonding with the better readability of their display due to reduced reflection.
Optical bonding provides a multitude of advantages
It's a closed system
Cost savings in procurement - standard display instead of high-brightness display, the lower power consumption of the standard display results in energy savings in operation. The service life is significantly extended by less stress on the backlight.
Excellent readability when exposed to direct light
Safe from vandalism
In the composite a kind of safety glass
Increases the longevity of the display through heat dissipation
Moisture Resistant
Keine Kondenswasser – odNo condensation or mist formation with temperature differenceser Nebelbildung bei Temperaturunterschiede
No chipping on glass | Touchbruck (accident-relevant)
Better heat dissipation than with an existing air gap
Shock resistance is extremely increased
Protects against dust
Stable and tension-equalizing connection of the individual components
No yellowing
Excellent improvement in contrast and display colors
Significantly more durable than airbonding
High shock resistance
Our bonding technique was developed in-house and guarantees Optical Bonding at the highest level.
Adhesives and processes used in our house
Liquid bonding of glass / PlexilTouch | Display: Acrylate - UV
Liquid bonding of glass / PlexilTouch | Display: 1K silicone - UV
Liquid bonding of glass / PlexilTouch | Display: 2K silicone
Vacuum bonding of glass / PlexilTouch | Display: Alpha GEL-Taica (dry bonding)
In the air-bonding of touch / display assemblies
Laminating foil touch on glass / plexiglass
Laminating design foils on touch systems
